Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 2 çevriliyor
Adım 2
-
Peel back the left rubber grip using a plastic opening pick.
-
Underneath the grip, remove the following screws:
-
Four M1.7x5.0mm T6 Torx screws
-
On the right side of the camera, remove the following screws:
-
One M1.7x5.5mm JIS #000 screw
-
One M1.7x3.5mm JIS #000 screw
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.