Ana içeriğe geç

Reemplazo del ensamblaje del panel frontal del iPhone 5s

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 32 kılavuzları etkileyecektir.

İngilizce
İspanyolca
Adım 3
iPhone 5s Front Panel Assembly Replacement, Display separation prevention: adım 0, 3 resimden 1. iPhone 5s Front Panel Assembly Replacement, Display separation prevention: adım 0, 3 resimden 2. iPhone 5s Front Panel Assembly Replacement, Display separation prevention: adım 0, 3 resimden 3.
Display separation prevention
  • In the following steps you will be pulling the display up out of the phone body. The display is composed of a glass screen and a plastic bezel with metal clips.

  • Regardless of the tool you use, you need to be sure you pull up the entire display.

  • If the glass begins to separate from the plastic, as shown in the first image, slide a plastic opening tool between the plastic frame and the metal phone body to pry the metal clips out of the case.

  • If you are reassembling a phone with a separated display bezel, you may want to place a thin strip of adhesive between the plastic bezel and the glass to keep the phone closed.

En los siguientes pasos vas a separar la pantalla del cuerpo del teléfono. La pantalla está formada por cristal y un bisel de plástico con clips metálicos en los laterales.

Da igual que herramienta utilices, pero debes estar seguro de que sacas toda la pantalla.

Si el cristal empieza a separarse del plástico, como se muestra en la primera imagen, desliza una herramienta de apertura entre el bisel de plástico y el cuerpo metálico del teléfono para que los clips metálicos de los laterales salgan del chasis.

Si estás montando el teléfono y tiene el bisel de plástico de la pantalla separado, deberías poner una fina tira de adhesivo entre el bisel y el cristal de la pantalla para mantener el teléfono cerrado.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.