Skip to main content

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 32 kılavuzları etkileyecektir.

İngilizce
Japonca

Adım 13 çevriliyor

Step 13
Once the connector has been released, pull the home button end of the assembly away from the rear case, using the top of the phone as a hinge. Open the display to about a 90º angle, and lean it against something to keep it propped up while you're working on the phone. Add a rubber band to keep the display securely in place while you work. This prevents undue strain on the display cables.
Opening up the phone
  • Once the connector has been released, pull the home button end of the assembly away from the rear case, using the top of the phone as a hinge.

  • Open the display to about a 90º angle, and lean it against something to keep it propped up while you're working on the phone.

  • Add a rubber band to keep the display securely in place while you work. This prevents undue strain on the display cables.

  • In a pinch, you can use an unopened canned beverage to hold the display.

コネクターの接続が外れたら、本体上部を蝶番のようにして、アセンブリのホームボタン先端をリアケースから引き上げます。

ディスプレイを約90度で開き、作業中固定するため、ディスプレイの後ろに衝立を用意します。

作業中、輪ゴムでディスプレイを固定してください。これはディスプレイケーブルに過度な圧力が加わらないようにするためです。

急な場合は、未開封の飲用水缶を使ってディスプレイを支えてください。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.