Ana içeriğe geç

Sony Cyber-Shot DSC-W330 Circuit Board Replacement

İngilizce
Çince

Adım 1 çevriliyor

Adım 1
Sony Cyber-Shot DSC-W330 Circuit Board Replacement: adım 0, 3 resimden 1. Sony Cyber-Shot DSC-W330 Circuit Board Replacement: adım 0, 3 resimden 2. Sony Cyber-Shot DSC-W330 Circuit Board Replacement: adım 0, 3 resimden 3.
  • Place the camera so that the lens would be facing down. Use the phillips head screwdriver to remove the small silver screw in the top right corner.

  • Gently peel back the black adhesive tape from the top edge.

  • The tape is attached to the ribbon cable. Be very careful not to tear or damage the ribbon cable when removing the tape.

  • Use the plastic opening tool to pry the black locking tab up.

  • Gently remove the ribbon cable from the connector

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.