Ana içeriğe geç
İngilizce
Fransızca
Adım 2
On a piece of paper, mark the endpoints of a line that measures the length of the hole, plus one inch. Mark the center of the two endpoints. From the center, turn the measuring tape 90 degrees. Mark the endpoints of a line that measures the width of the hole, plus one inch.
  • On a piece of paper, mark the endpoints of a line that measures the length of the hole, plus one inch.

  • Mark the center of the two endpoints.

  • From the center, turn the measuring tape 90 degrees. Mark the endpoints of a line that measures the width of the hole, plus one inch.

Sur votre papier, marquez les points extrêmes d’une ligne correspondant à la longueur que vous venez de mesurer, en ajoutant 2,5 cm.

Marquez le centre de cette ligne.

En partant de ce point, tournez votre mètre-ruban à 90°. Marquez maintenant les points extrêmes d’une ligne correspondant à la largeur que vous venez de mesurer, en lui ajoutant 2,5 cm.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.