Ana içeriğe geç
İngilizce
Fransızca
Adım 5
Lay your pattern over the piece of fabric you’ve choosen to use as a patch. It is important to choose a fabric that is only slightly heavier than your sweater, such as corduroy or a felted sweater. Anything heavier, such as denim or leather, may cause the sweater to tear. To felt a sweater, simply put a 100% wool sweater through the washer and dryer. When it comes out, the sweater should be shrunken and have a very tight weave.
  • Lay your pattern over the piece of fabric you’ve choosen to use as a patch.

  • It is important to choose a fabric that is only slightly heavier than your sweater, such as corduroy or a felted sweater. Anything heavier, such as denim or leather, may cause the sweater to tear.

  • To felt a sweater, simply put a 100% wool sweater through the washer and dryer. When it comes out, the sweater should be shrunken and have a very tight weave.

  • Pin your pattern piece onto your patch fabric.

  • If you double up the patch fabric before you pin you will get two identical patches, one for each side.

Posez maintenant le gabarit sur le tissu choisi pour votre coudière.

Important : Choisissez un tissu juste un peu plus épais que votre pull, du velours ou de la laine bouillie, par exemple. Si vous essayez d’utiliser un matériau beaucoup plus épais comme du denim ou du cuir, vous risquez de déchirer votre pull.

Vous pouvez fabriquer vous-même de la laine bouillie en faisant feutrer un vieux pull de laine. Il suffit de le passer en machine, puis dans un séchoir à linge. Après ce traitement, votre pull aura rétréci et sa matière sera beaucoup plus dense.

Épinglez le gabarit sur le tissu choisi.

En doublant le tissu, vous pouvez obtenir d’un coup deux pièces identiques.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.