Eşyalarını Tamir Et Topluluk Mağaza

裁縫ミシンに糸を通す方法

Kılavuza Dön
İngilizce
Japonca
Adım 4
Thread a Sewing Machine: adım 0, 2 resimden 1. Thread a Sewing Machine: adım 0, 2 resimden 2.

  • Hook the thread behind the small, bent arm where the needle attaches to the machine.

  • Guide the thread, from front to back, through the eye of the needle, leaving a loose end of approximately 10 cm.

  • If the end of your thread has frayed and you cannot guide it through the eye of the needle, snip off the frayed end and try again.

針がミシンに取り付けられている、小さく曲がった針棒糸かけの後ろに糸を引っ掛けます。

糸を手前から裏側へと針の目に通して、約10cm程度、糸を残します。

糸の端がほつれて針の目に通せなくなった場合は、ほつれた端を切り取ってからやり直してください。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.