Ana içeriğe geç
İngilizce
Fransızca
Adım 9
Remove the shield. Here is the PSU circuit board without shield. On the inside of the top part of the case, is a plastic (may be Kapton) tape that need to be removed. Simply pulling on it will release it.
  • Remove the shield.

  • Here is the PSU circuit board without shield.

  • On the inside of the top part of the case, is a plastic (may be Kapton) tape that need to be removed. Simply pulling on it will release it.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.