Ana içeriğe geç
İngilizce
Flemenkçe

Adım 11 çevriliyor

Adım 11
Proceed to solder the black cable from the AC charger to the outer wire of your Macbook connector. Isolate that wire. You don't need to cover up the whole extension of the outer wire, just enough so that it won't touch the white cable or the circuit board of the AC adapter. You can use the black rubber tube or  electrical tape. If you use the black tube try to keep it as far away as possible when soldering to prevent it from shrinking before you cover the wire.
  • Proceed to solder the black cable from the AC charger to the outer wire of your Macbook connector.

  • Isolate that wire. You don't need to cover up the whole extension of the outer wire, just enough so that it won't touch the white cable or the circuit board of the AC adapter.

  • You can use the black rubber tube or electrical tape. If you use the black tube try to keep it as far away as possible when soldering to prevent it from shrinking before you cover the wire.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.