Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 17 kılavuzları etkileyecektir.

İngilizce
İspanyolca

Adım 15 çevriliyor

Adım 15
Make sure the battery is disconnected before you disconnect or reconnect the cables in this step. Use a plastic opening tool or a fingernail to disconnect the LCD cable connector. The LCD and Digitizer connectors are on the same cable assembly, so prying the LCD connector up should disconnect both connectors. Double check that the two cables are fully disconnected before removing the display.
  • Make sure the battery is disconnected before you disconnect or reconnect the cables in this step.

  • Use a plastic opening tool or a fingernail to disconnect the LCD cable connector.

  • The LCD and Digitizer connectors are on the same cable assembly, so prying the LCD connector up should disconnect both connectors. Double check that the two cables are fully disconnected before removing the display.

  • When reassembling your phone, the LCD cable may pop off its connector. A blank screen, or white lines on the display could be caused by a loose connection. Should this happen, reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery.

Asegúrate de que la batería está desconectada antes de desconectar o reconectar los cables en este paso.

Usa una herramienta de apertura de plástico o tus uñas para desconectar el cable LCD.

Los conectores LCD y del digitalizador están en el mismo cable, así que al levantar el conector LCD ambos conectores se separarán. Comprueba que ambos cables están totalmente desconectados antes de separar la pantalla por completo.

Al montar tu teléfono de nuevo, el cable LCD podría desconectarse de su conector. Una pantalla en blanco o con líneas blancas sería un indicativo de una mala conexión debido a este problema. Si esto ocurre, reconecta el cable y haz un "power cycle". El "power cycle" simplemente consiste en desconectar y reconectar la batería.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.