Ana içeriğe geç
İngilizce
İspanyolca
Step 2
Several items need to be disconnected from the front caliper before it can be removed.
Remove the sensors
  • Several items need to be disconnected from the front caliper before it can be removed.

  • The first is the wiring harness for the brake pad sensors.

  • Use a 10mm wrench to remove the bolt and washer holding it to the caliper.

  • Then unplug the ends of the sensors from the harness.

  • Let the harness hang up and out of the way.

Se deberá desconectar varios ítems de la pinza delantera antes de que pueda ser eliminada.

El primero es el conector de cableado de los sensores de la pastilla de freno.

Use una llave de 10 mm para quitar el tornillo y la arandela que lo sujeta a la pinza.

Luego desconecte los extremos de los sensores del conector.

Deje el conector suelto donde no moleste

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.