Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

İngilizce
Fransızca
Adım 7
Make sure you note the position of the positive and negative terminals. Start by removing a bit of solder with the pump. Separate the cables. It may require some force, so be careful not to break the board.
  • Make sure you note the position of the positive and negative terminals.

  • Start by removing a bit of solder with the pump.

  • Separate the cables. It may require some force, so be careful not to break the board.

Assurez-vous de respectez la position pour les pôles négatif et le positif.

Pour commencer enlevez un peu d'étain avec la pompe à dessouder

Retirez les câbles, il faut un peu forcer mais soyez prudent pour ne pas casser la plaque (circuit imprimé).

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.