Ana içeriğe geç
İngilizce
Çince
Adım 2
When the adhesive has been adequately heated, use the edge of a plastic opening tool to gently pry the plastic display frame away from the front glass panel. Run your tool under the plastic display frame to separate it from the front glass near the home button area.
  • When the adhesive has been adequately heated, use the edge of a plastic opening tool to gently pry the plastic display frame away from the front glass panel.

  • Run your tool under the plastic display frame to separate it from the front glass near the home button area.

  • If the panel does not separate from the frame, reheat the area you are working on and try again. The adhesive must reach a certain temperature before it will yield, and reaching that point may require reheating the area several times. Once the adhesive has reached the right temperature, it should be fairly easy to run a plastic opening tool under the frame to separate it from the front glass panel.

当胶粘剂被充分加热时,使用塑料撬棒边缘轻轻地撬开玻璃面板上的塑料支架。

在塑料支架下滑动塑料撬棒使其从靠近前面板玻璃的主按钮区域分离出来。

如果面板与支架没有分离,重新加热正在处理的区域并再次尝试。胶粘剂必须达到一定的温度才会分离,达到这个点可能需要重新加热该区域好几次。一旦胶粘剂达到适当的温度,在支架滑动塑料撬棒,把其与前玻璃板分开是相当容易的。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.