Ana içeriğe geç
İngilizce
Japonca
Adım 7
To separate the ribbon cable side of the display bracket, begin by heating near the lower left corner of the panel (as viewed from the front of the iPad). Carefully separate the lower edge of the ribbon cable side of the frame until you reach another area where rubber connects the frame to the glass panel. Repeat the process outlined in previous steps to cut through the rubber "dots" connecting the two pieces.
  • To separate the ribbon cable side of the display bracket, begin by heating near the lower left corner of the panel (as viewed from the front of the iPad).

  • Carefully separate the lower edge of the ribbon cable side of the frame until you reach another area where rubber connects the frame to the glass panel.

  • Repeat the process outlined in previous steps to cut through the rubber "dots" connecting the two pieces.

  • Be careful when separating this side, as there is fragile ribbon running beneath the frame.

ディスプレイブラケットのリボンケーブル側を分離するには、まずパネルの左下隅付近を加熱します(iPadの正面から見た場合)。

フレームのリボンケーブル側下端が、フレームとガラスパネルをつなぐゴムがあるエリアに届くまで、慎重に切り離します。

前の手順を繰り返して、2つのパーツを繋ぐゴムの "ドット "に切り込みを入れます。

この側面を切り離す際は、フレームの下にデリケートなリボンが配線されているので注意が必要です。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.