Ana içeriğe geç
İngilizce
Çince
Adım 5
Lightly heat the rubber connection area. Use a plastic opening tool to separate the plastic display frame from the front glass panel enough to access the rubber area.
  • Lightly heat the rubber connection area. Use a plastic opening tool to separate the plastic display frame from the front glass panel enough to access the rubber area.

  • While holding the display frame away from the front glass, use a razor blade to carefully cut through the many rubber "dots" attaching the frame to the front panel.

  • The razor blade may scratch the black painted border off the inside of the glass panel. If you are reusing your front glass panel, try not to scratch the glass while cutting. Also, to prevent cosmetic damage, avoid cutting through the outer rubber strip.

稍微加热橡胶黏住区域。使用塑料撬棒将塑料支架与前玻璃面板分开,以进入橡胶黏住区域。

当把屏幕支架从前玻璃面板上分开的时,用剃刀小心地分离开连接到前玻璃面板上的橡胶“点”。

剃刀会刮擦到玻璃面板内部的黑色边框。如果需要重复使用前玻璃面板,尽量不要在切割时刮擦到玻璃。此外,为了防止化学损伤 ,需要避免切割到外面的橡胶条。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.