Eşyalarını Tamir Et Topluluk Mağaza

手机电池加倍技术

Kılavuza Dön
İngilizce
Çince
Adım 4
Phone Battery Doubling Technique: adım 0, 2 resimden 1. Phone Battery Doubling Technique: adım 0, 2 resimden 2.

  • Before bridge 2 batteries together, ensure voltage difference between them less than 50mV. New batteries will very likely have about 3.9V voltage, and varies very little.

  • Bridge one B+ to anotherB+ first. Use soldering iron and solder.

  • Then, P- to P-.

  • Leave Both B- open!

  • One more WARNING! Be very careful with B- test point. DO NOT MESS WITH THEM. B- are not protected by "Protection Circuits". Do NOT bridge B-, unless you know what you don't know!

  • Of course. NEVER short-circuit any B- to any B+, or P- to B+, or P- to B-!

将 2 块电池桥接在一起之前，请确保它们之间的电压差小于 50mV。新电池的电压很可能约为 3.9V，并且变化很小。

首先将一个 B+ 桥接到另一个 B+。使用烙铁和焊料。

然后，P-到P-。

让两个 B- 都开放！

再次警告! 对B-测试点要非常小心。不要乱动它们。B-没有受到 "保护电路 "的保护。不要给B-搭桥，除非你知道你不知道的东西!

当然。切勿将任何 B- 与任何 B+、或 P- 与 B+、或 P- 与 B- 短路！

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.