Ana içeriğe geç

Técnica de duplicación de la batería del teléfono

İngilizce
İspanyolca
Adım 6
Phone Battery Doubling Technique: adım 0, 1 resimden 1.
  • Use the skin of the peeled bat to fully bond them.

  • Cover the notches and wires with some tape. Shown PI/Kapton tape will be the best choice, anything thin enough and isolate is ok.

  • The skin is a little short for 2 cells. The exposed metal should be covered also. They are the positive terminal. You don't wanna short-circuit something, do you? (not yet covered in these photos)

Usa la piel de la bateria pelandola para unirlas por completo.

Cubre las muescas y los cables con un poco de cinta. La cinta PI/Kapton que se muestra será la mejor opción, cualquier cosa lo suficientemente delgada y aislada está bien.

La piel es un poco corta para 2 celdas. El metal expuesto también debe cubrirse. Son el terminal positivo. No querrás cortocircuitar algo, ¿verdad? (aún no cubierto en estas fotos)

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.