Ana içeriğe geç
İngilizce
İspanyolca

Adım 1 çevriliyor

Adım 1
I've boxed where the ribbon cable connectors go for the screen and camera. The soldering joints are marked with a Blue and a Red dot to indicate where to solder the speaker wires.
  • I've boxed where the ribbon cable connectors go for the screen and camera.

  • The soldering joints are marked with a Blue and a Red dot to indicate where to solder the speaker wires.

  • The second picture shows the wires soldered to the logic board.

  • The loud speaker replacement was very tedious job.. anyways Good Luck

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.