Skip to main content

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 8 kılavuzları etkileyecektir.

İngilizce
Japonca

Adım 14 çevriliyor

Step 14
Use the flat end of a spudger to disconnect the front-facing camera connector from the  logic board. Pry up only on the connector—not on the socket itself. Fold the front-facing camera cable out of the way.
  • Use the flat end of a spudger to disconnect the front-facing camera connector from the logic board.

  • Pry up only on the connector—not on the socket itself.

  • Fold the front-facing camera cable out of the way.

  • There is a bit of conductive adhesive between the gold-colored cable contacts. Be sure to apply pressure to readhere these contacts during reassembly.

スパッジャーの平面側先端を使って、正面カメラのコネクターをロジックボードから接続を外します。

コネクターのみ接触してください。ソケットには触らないでください。

正面カメラケーブルが邪魔にならない位置に折り曲げておきます。

[* black] Use the flat end of a spudger to disconnect the front-facing camera connector from the logic board.
[* icon_caution] Pry up only on the connector—'''not''' on the socket itself.
[* black] Fold the front-facing camera cable out of the way.
[* icon_reminder] There is a bit of conductive adhesive between the gold-colored cable contacts. Be sure to apply pressure to readhere these contacts during reassembly.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.