Eşyalarını Tamir Et Topluluk Mağaza

Clearing Jammed Printrbot Simple Metal 2014 Hot End

Kılavuza Dön
İngilizce
Almanca
Sonraki adım

Adım 1 çevriliyor

Adım 1
Clearing Jammed Printrbot Simple Metal 2014 Hot End: adım 0, 1 resimden 1.

  • Big thanks to Ian Lewis of Printrbot's Support team for guiding me through fixing my Simple.

  • Your printer's hot end is comprised of two stages. The beige plastic part is a thermal break between the 200C heater cartridge and the feeding mechanism above.

  • The job of the beige part is to keep the filament cool before it reaches the heated element.

  • The part pictured is made with PEEK plastic. http://reprap.org/wiki/PEEK

  • For more term definitions, see http://reprap.org/wiki/RepRap_Options#Ex...

  • Anyway, we're here because this thing is jammed. Read on.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.