Ana içeriğe geç
İngilizce
Japonca
Adım 4
Carefully insert an opening pick between the button ribbon cable and the edge of the case. Slide the pick along the length of the cable, stopping at the corner of the case. Go slowly and carefully—if you slip, you could cut the ribbon cable.
  • Carefully insert an opening pick between the button ribbon cable and the edge of the case.

  • Slide the pick along the length of the cable, stopping at the corner of the case.

  • Go slowly and carefully—if you slip, you could cut the ribbon cable.

ボタンリボンケーブルとケース端の間に開口ピックを注意深く差し込みます。

ケーブルの長さに沿ってピックをスライドし、ケース角で止めます。

作業は慎重に、かつ注意深く進めてください—ピックが滑ってしまうとリボンケーブルを切断する恐れがあります。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.