Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 5 kılavuzları etkileyecektir.

İngilizce
Japonca
Adım 2
Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals. Insert a plastic card under the lower battery cell, at the lower right-hand corner. If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.
  • Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad, to separate the adhesive securing the battery. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

  • Insert a plastic card under the lower battery cell, at the lower right-hand corner.

  • If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.

次の手順では薄いプラスチックカードをiPadのバッテリーと背面ケースの間に差し込み、スライドしながらバッテリーに留められた接着剤を剥がしていきます。バッテリーが曲がらないようにできるだけカードを平らな状態で作業を進めてください。バッテリーが曲がってしまうと、バッテリーにダメージを与えてしまい、危険な化学物質が排出されることがあります。

デバイスの右側端の下部、バッテリーの下部分にプラスチックカードを差し込みます。

かなりの接着剤からの抵抗力を感じたら、iOpener を再度温めて接着剤が柔らかくなるまで前述の手順を繰り返してください。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.