Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 5 kılavuzları etkileyecektir.

İngilizce
Japonca

Adım 16 çevriliyor

Adım 16
Use the sharp tip of a spudger to lift the front panel assembly cable connector straight up off its socket on the motherboard. Safely remove the front panel assembly from phone. If your replacement display did not come with a home button, follow our Home Button Assembly guide to transfer your old button over to the new display, or install a new button.
  • Use the sharp tip of a spudger to lift the front panel assembly cable connector straight up off its socket on the motherboard.

  • Safely remove the front panel assembly from phone.

  • If your replacement display did not come with a home button, follow our Home Button Assembly guide to transfer your old button over to the new display, or install a new button.

スパッジャーの先端を使って基盤上のソケットからフロントパネルアセンブリのケーブルコネクターの接続を引き上げて外します。

フロントパネルアセンブリを電話本体から丁寧に取り出します。

[* black] Use the sharp tip of a spudger to lift the front panel assembly cable connector straight up off its socket on the motherboard.
[* black] Safely remove the front panel assembly from phone.
+[* icon_reminder] If your replacement display did not come with a home button, follow our [guide|119508|Home Button Assembly|new_window=true] guide to transfer your old button over to the new display, or install a new button.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.