Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

İngilizce
Fransızca

Adım 20 çevriliyor

Adım 20
The heatsink is attached to the logic board by these screws. The large dual ribbon cable for the printhead attaches to two connectors on the logic board, one on each side. The large dual ribbon cable for the printhead attaches to two connectors on the logic board, one on each side.
  • The heatsink is attached to the logic board by these screws.

  • The large dual ribbon cable for the printhead attaches to two connectors on the logic board, one on each side.

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.