Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 3 çevriliyor
Adım 3
-
Loosen screw 1
-
Do not completely loosen a screw.
-
Loosen each screw a little bit. Going from 1 then to 2 then to 3 and then to 4. Keep doing this until they are all loose.
-
Loosening one completely with out the other screws loosened may damage the logic board
-
Lift the heatsink up, until it won't rise any farther.
-
Pull the heat sink out.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.