Ana içeriğe geç

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 2 kılavuzları etkileyecektir.

İngilizce
Japonca
Adım 2
Insert the tip of a spudger under each of the antenna cables near their connectors and pry up to disconnect them from the AirPort board. The three cables are coded with black sleeves of different lengths. During reassembly: Connect the long-sleeved cable to the center socket.
  • Insert the tip of a spudger under each of the antenna cables near their connectors and pry up to disconnect them from the AirPort board.

  • The three cables are coded with black sleeves of different lengths. During reassembly:

  • Connect the long-sleeved cable to the center socket.

  • The short-sleeved cable connects next to the screw.

  • The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.

アンテナケーブルコネクター付近のアンテナケーブル3本の下にスパッジャーを差し込み、AirPortボードからケーブルを持ち上げます。

3本のケーブルはそれぞれ異なる長さの黒色スリーブでコートされています。再組み立ての際は次の点にご注意ください。

長いスリーブケーブルは中央のソケットに接続してください。

短いスリーブのケーブルはネジの隣に接続します。

最後のケーブルにはスリーブが付けられていません。これをファンの隣のソケットに接続します。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.