Skip to main content

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 10 kılavuzları etkileyecektir.

İngilizce
Almanca
Step 4
Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board. To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery. Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.
  • Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.

  • To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.

  • Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.

Entferne die einzelne 2,3 mm Kreuzschlitzschraube, welche den Akkustecker am Logic Board befestigt.

Du kannst die Gefahr eines Kurzschlusses verringern, indem du ein Isolierpick für Akkus einsetzt, um den Akku abzutrennen.

Schiebe das Isolierpick unter den Akkuanschluss auf dem Logic Board und lasse es an Ort und Stelle, während du reparierst.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.