Ana içeriğe geç

iMac Intel 21.5" EMC 2638 디스플레이 교체

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 13 kılavuzları etkileyecektir.

İngilizce
Korece
Adım 4
iMac Intel 21.5" EMC 2638 Display Replacement: adım 0, 3 resimden 1. iMac Intel 21.5" EMC 2638 Display Replacement: adım 0, 3 resimden 2. iMac Intel 21.5" EMC 2638 Display Replacement: adım 0, 3 resimden 3.
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply (boxed in red).

  • Grasp the small tab at the end of one of the bottom edge display adhesive strips and pull the adhesive toward the top of the iMac to remove it.

  • Repeat this step with the other adhesive strip and remove it.

  • If either adhesive strip breaks before it's removed, use a plastic card to slice through the remaining adhesive.

전원 공급 장치 뒷면의 커패시터 리드 또는 노출된 납땜 접합부(빨간색 상자)를 만지지 않도록 주의하세요.

하단 가장자리 디스플레이 접착 스트립 중 하나의 끝에 있는 작은 탭을 잡고 접착제를 iMac 상단을 향해 당겨서 제거하세요.

다른 접착 스트립에도 이 단계를 반복하여 제거합니다.

제거하기 전에 접착 스트립이 끊어지면 플라스틱 카드를 사용하여 남은 접착제를 잘라내세요.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.