Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 18 kılavuzları etkileyecektir.

İngilizce
Japonca

Adım 13 çevriliyor

Adım 13
Make sure the battery is disconnected before you disconnect or reconnect the cable in this step. Use a plastic opening tool to disconnect the display data cable connector.
  • Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.

  • Use a plastic opening tool to disconnect the display data cable connector.

  • When reassembling your phone, the display data cable may pop off the connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery connector.

プラスチックの開口ツールを使って、ディスプレイデータのケーブルコネクターの接続を外します。

デバイスを再組み立てする際は、本体ディスプレイのデータケーブルがコネクターから飛び出すことがあります。これは電源スイッチを入れた時、黒い画面に白い線が表れる原因となります。この症状が現れた場合は一度ケーブルを再接続して、再起動してください。電話を再起動する一番ベストな方法は、バッテリーコネクターの接続を切ってから再び再接続します。

[* icon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.
[* black] Use a plastic opening tool to disconnect the display data cable connector.
[* icon_reminder] When reassembling your phone, the display data cable may pop off the connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to [guide|29424|disconnect and reconnect the battery connector.|stepid=69596]

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.