Ana içeriğe geç

iPhone 6 Plus 前面板组件更换

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 18 kılavuzları etkileyecektir.

İngilizce
Çince

Adım 14 çevriliyor

Adım 14
iPhone 6 Plus Front Panel Assembly Replacement: adım 0, 2 resimden 1. iPhone 6 Plus Front Panel Assembly Replacement: adım 0, 2 resimden 2.
  • Finally, disconnect the digitizer cable connector.

  • When reconnecting the digitizer cable, do not press the center of the connector. Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the component and cause digitizer damage.

用撬棒的平头断开触摸层排线接头。

当你要组装触摸层排线时, 请不要按压接头的中间地方。按压接头的一端, 接着再按压另一端。因为若是按压接头中间时, 有可能造成触摸层变形损坏。

-[* black] Finally, use a plastic opening tool to disconnect the digitizer cable connector.
+[* black] Finally, disconnect the digitizer cable connector.
[* icon_reminder] When reconnecting the digitizer cable, ***do not press the center of the connector***. Press one end of the connector, then press the opposite end. Pressing in the center of the connector can bend the component and cause digitizer damage.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.