Ana içeriğe geç
İngilizce
Japonca

Adım 2 çevriliyor

Adım 2
To remove the logic board from the body, use the #00 phillips head screwdriver and remove the 4mm silver screw from right side of the board. Next, rotate the camcorder so the front is facing you and remove the 4mm silver screw from the front panel. Carefully lift the logic board away from the camcorder.
  • To remove the logic board from the body, use the #00 phillips head screwdriver and remove the 4mm silver screw from right side of the board.

  • Next, rotate the camcorder so the front is facing you and remove the 4mm silver screw from the front panel.

  • Carefully lift the logic board away from the camcorder.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.