Ana içeriğe geç

MacBook Pro 15" Unibody Mid 2010の基板の交換

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 7 kılavuzları etkileyecektir.

İngilizce
Japonca
Adım 2
MacBook Pro 15" Unibody Mid 2010 Logic Board Replacement: adım 0, 2 resimden 1. MacBook Pro 15" Unibody Mid 2010 Logic Board Replacement: adım 0, 2 resimden 2.
  • Use the flat end of a spudger to pry the right fan connector up out of its socket on the logic board.

  • It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.

  • Remove the right fan from the upper case.

スパッジャーの平面側先端を使って、基板上のソケットから右側ファンコネクタをこじ開けます。

コネクタを解放するには、ファンケーブルワイヤの下からスパッジャーを一線上にツイストしながら引き上げると作業がしやすいです。

上部ケースから右側ファンを取り出します。

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.