Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.
Adım 1 çevriliyor
Adım 1
-
Begin by removing the four designated 1.33x2.00 mm Phillips screws with the screwdriver, as shown in the first picture.
-
Once the screws are removed, use a pair of tweezers or the spudger to remove the battery connector.
-
Pull the battery connector up as shown in the second picture.
-
Once the battery connector is removed, you can remove the battery using the spudger as shown in the third picture.
[* red] Begin by removing the four designated 1.33x2.00 mm Phillips screws with the screwdriver, as shown in the first picture. | |
- | [* black] Once the screws are removed, use a pair of tweezers or the spudger to remove the battery connector. |
+ | [* black] Once the screws are removed, use a pair of [product|IF145-020|tweezers] or the spudger to remove the battery connector. |
[* black] Pull the battery connector up as shown in the second picture. | |
[* black] Once the battery connector is removed, you can remove the battery using the spudger as shown in the third picture. |
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.