Eşyalarını Tamir Et Topluluk Mağaza

Remplacement des amortisseurs JD Razor 2000

Önceki adım

Adım 2 çevriliyor

Kılavuza Dön
İngilizce
Fransızca
Adım 2
JD Razor 2000 Shocks Replacement, Removing the Wheel Holder and Shock: adım 0, 2 resimden 1. JD Razor 2000 Shocks Replacement, Removing the Wheel Holder and Shock: adım 0, 2 resimden 2.
Removing the Wheel Holder and Shock

  • Firmly grasp the metal piece that holds the wheel and gently pull it away.

  • The shocks should fall out naturally by themselves. This is normal and expected. If they do not, gently pull the shocks out of their holders.

  • A metal cylinder is located inside the spring of the shock. Do not lose this.

Retrait du support de roue et de l'amortisseur

Saisissez fermement la pièce métallique qui maintient la roue et retirez-la doucement.

Les chocs devraient tomber naturellement d'eux-mêmes. Ceci est normal et attendu. Si ce n'est pas le cas, retirez doucement les amortisseurs de leurs supports.

Un cylindre métallique est situé à l'intérieur du ressort de l'amortisseur. Ne perdez pas cela.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.