Apple TV 1st Generation Power Indicator LED Replacement

İngilizce

Almanca

Adım 2 çevriliyor

Adım 2

There are two miniature SMD LEDs. One is clear and one is yellow. Unsolder the YELLOW colored LED. Replace with another high intensity SMD LED. The anode (+) is marked on the circuit board and is located away from the infrared receiver side.
SMD LEDs are difficult to find as a spare part. You can carefully ground down a normal sized LED with a Dremil until it is the correct fit.
Reassemble the Apple TV following the reverse of these to steps used to disassemble it.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.