Brother MFC-490CW Print head Replacement

İngilizce

İtalyanca

Adım 1 çevriliyor

Adım 1

Brother MFC-490CW Print head Replacement, Separate the arm holding scanner unit: adım 0, 3 resimden 1.

Brother MFC-490CW Print head Replacement, Separate the arm holding scanner unit: adım 0, 3 resimden 2.

Brother MFC-490CW Print head Replacement, Separate the arm holding scanner unit: adım 0, 3 resimden 3.

Separate the arm holding scanner unit

Before removing the unit, apply 2 or 3 pieces of tape to secure the top and bottom of the unit.
Lift the scanner unit.
Gently twist the top portion of the arm.
The top portion should release from the scanner unit.
Rotate the arm approximately 45 degrees to remove the bottom portion of the arm from the device.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.