Ana içeriğe geç
İngilizce
Flemenkçe
Adım 5
If the clip in the faceplate is missing, the unit has been previously serviced. It is not essential, but try to keep it intact as the bezel will be loose without it.
Remove the retention pin on the faceplate
  • If the clip in the faceplate is missing, the unit has been previously serviced. It is not essential, but try to keep it intact as the bezel will be loose without it.

  • This pin is installed by the factory. To remove this pin, push it out from the back until it is loose. Remove the pin when it is loose.

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.