Ana içeriğe geç
İngilizce
Japonca
Adım 5
The next steps are to disconnect the electrical connections (the wiring harness).
  • The next steps are to disconnect the electrical connections (the wiring harness).

  • Start with the connections at the rear of the machine. The earth wire (yellow/green) is on the left.

  • Use a marker to label the two power wires - it will make it easier to reassemble later. Be sure to pull on the plastic clip rather than the cable.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.