Ana içeriğe geç
İngilizce
Almanca
Adım 4
Use the 1/4" socket drive end of the included screwdriver with no bit inserted to remove the four X-clamp posts from both the CPU and GPU heatsinks.
  • Use the 1/4" socket drive end of the included screwdriver with no bit inserted to remove the four X-clamp posts from both the CPU and GPU heatsinks.

Nutze den 1/4'' Steckschlüsselaufsatz des beiliegenden Schraubenziehers ohne ein Bit um die vier Befestigungen der X-förmigen Klammern vom CPU und GPU rauszuschrauben.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.