Eşyalarını Tamir Et Topluluk Mağaza

Remplacement de la batterie du Nexus 6

Sonraki adım

Adım 1 çevriliyor

Kılavuza Dön
İngilizce
Fransızca
Adım 1
Nexus 6 Battery Replacement, Battery Disassembly: adım 0, 3 resimden 1. Nexus 6 Battery Replacement, Battery Disassembly: adım 0, 3 resimden 2. Nexus 6 Battery Replacement, Battery Disassembly: adım 0, 3 resimden 3.
Battery Disassembly

  • With your hands, pull the battery away from the rest of the casing.

  • Using tweezers, unplug the battery connector. Pry up underneath the hard backing plate, taking care to not peel the cable off of the backing plate.

  • Measure the location of the charging coil on the old battery and transfer those measurements to the new battery. Carefully peel off the charging coil.

  • Transfer the charging coil to the new battery. For the four-wire connector on the other side, measure the location of the contacts/pins on the phone itself and transfer it to the backside of the battery.

Démontage de la batterie

Avec vos mains, retirez la batterie du reste du boîtier.

À l'aide d'une pince à épiler, débranchez le connecteur de la batterie. Faites levier sous la plaque de support rigide, en prenant soin de ne pas décoller le câble de la plaque de support.

Mesurez l'emplacement de la bobine de charge sur l'ancienne batterie et transférez ces mesures sur la nouvelle batterie. Décollez soigneusement la bobine de charge.

Transférer la bobine de charge sur la nouvelle batterie. Pour le connecteur à quatre fils de l'autre côté, mesurez l'emplacement des contacts/broches sur le téléphone lui-même et transférez-le à l'arrière de la batterie.

[title] Battery Disassembly
[* black] With your hands, pull the battery away from the rest of the casing.
-[* black] Using tweezers, unplug the battery connector. Pry up underneath the hard backing plate, taking care to not peel the cable off of the backing plate.
+[* black] Using [product|IF145-020|tweezers], unplug the battery connector. Pry up underneath the hard backing plate, taking care to not peel the cable off of the backing plate.
[* black] Measure the location of the charging coil on the old battery and transfer those measurements to the new battery. Carefully peel off the charging coil.
[* black] Transfer the charging coil to the new battery. For the four-wire connector on the other side, measure the location of the contacts/pins on the phone itself and transfer it to the backside of the battery.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.