Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.
Adım 1 çevriliyor
Adım 1
-
Unplug the charger and remove any memory card you may have in the device.
-
Wedge the plastic opening tool between the front and back cover on every side.
-
Slide the plastic opening tool back and forth to make sure that the back cover is disconnected.
-
Once disconnected, remove the back cover from the device screen.
- | [* black] Plug out the charger and pull out the memory card if connected as a preliminary step. |
---|---|
[* icon_caution] Make sure that the device is turned off as a precaution. | |
- | [* black] Wedge the plastic opening tool between the front and back cover on every side as shown on the photos. |
+ | [* black] Unplug the charger and remove any memory card you may have in the device. |
+ | [* black] Wedge the plastic opening tool between the front and back cover on every side. |
[* black] Slide the plastic opening tool back and forth to make sure that the back cover is disconnected. | |
- | [* black] |
+ | [* black] Once disconnected, remove the back cover from the device screen. |
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.