Eşyalarını Tamir Et Topluluk Mağaza

Remplacement de la batterie de l'Asus MeMo Pad FHD10

Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız herhangi bir değişiklik bu adımın yer aldığı bütün 4 kılavuzları etkileyecektir.

Kılavuza Dön
İngilizce
Fransızca
Önceki adım

Adım 4 çevriliyor

Adım 4
ASUS MeMo Pad FHD10 Battery Replacement: adım 0, 3 resimden 1. ASUS MeMo Pad FHD10 Battery Replacement: adım 0, 3 resimden 2. ASUS MeMo Pad FHD10 Battery Replacement: adım 0, 3 resimden 3.

  • Locate the battery cable attached to the motherboard. Using the same technique used on the ribbons, do the same with the battery.

  • Remove the battery from the device. Once removed, use the plastic tool to separate the metal frame from the battery.

  • When separating the metal frame, be sure to hold on in the center as the battery is two separate cells.

Localisez le câble de la batterie attaché à la carte mère. Retirez délicatement le câble à l'aide d'une pince à épiler, de la même manière que pour les câbles plats.

Par conséquent, vous pouvez retirer la batterie de l'appareil. Vous pouvez ensuite séparer le cadre métallique situé à l'arrière de la batterie en calant délicatement l'outil en plastique entre les deux parties et le faire glisser d'avant en arrière jusqu'à ce que le cadre métallique soit retiré.

Lorsque vous séparez la batterie du cadre métallique, veillez à la maintenir fermement au centre d’une main, car la batterie entière se compose de deux piles plus petites reliées entre elles.

-[* red] Locate the battery cable attached to the motherboard. Remove the cable gently using tweezers, the same way applied before for the ribbon cables.
-[* black] Now, you are able to remove the battery from the device. You can then separate the metal frame located at the back of the battery by gently wedging the plastic open tool in between the two parts, and slide it back and forth until the metal frame is removed.
-[* icon_note] When you separate the battery from the metal frame, be sure to hold it tight on the center by one hand, since the whole battery consists of two smaller batteries joined together.
+[* red] Locate the battery cable attached to the motherboard. Using the same technique used on the ribbons, do the same with the battery.
+[* black] Remove the battery from the device. Once removed, use the plastic tool to separate the metal frame from the battery.
+[* icon_note] When separating the metal frame, be sure to hold on in the center as the battery is two separate cells.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.