Ana içeriğe geç

Remplacement de l'écran LCD du Sony SLT-A57

İngilizce
Fransızca
Adım 2
Sony SLT-A57 LCD Screen Replacement, Pry open the LCD screen: adım 0, 2 resimden 1. Sony SLT-A57 LCD Screen Replacement, Pry open the LCD screen: adım 0, 2 resimden 2.
Pry open the LCD screen
  • Delicately pry open the LCD screen from the plastic frame starting with the top edge of the screen (the top edge is on the left side of the camera when holding it). Pull open the bottom side of the screen after the top to avoid damaging the yellow flex cables located near the bottom edge.

  • When removing the broken screen be careful not to damage the thin adhesive strip that holds the display to the frame, as you will need to transfer this strip to the new screen.

  • Gently unplug the two small yellow flex cables from the bottom edge of the printed circuit board.

Retirez délicatement l'écran LCD du cadre en plastique en commençant par le bord supérieur de l'écran (le bord supérieur se trouve sur le côté gauche de l'appareil photo lorsque vous le tenez). Ouvrez la partie inférieure de l'écran après le haut pour éviter d'endommager les câbles flexibles jaunes situés près du bord inférieur.

Lorsque vous retirez l'écran cassé, veillez à ne pas endommager la fine bande adhésive qui maintient l'écran sur le cadre, car vous devrez transférer cette bande sur le nouvel écran.

Débranchez doucement les deux petits câbles flexibles jaunes du bord inférieur de la carte de circuit imprimé.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.