Ana içeriğe geç

Sony SLT-A57 LCD Screen Replacement

İngilizce
Japonca
Adım 3
Sony SLT-A57 LCD Screen Replacement, Transfer printed circuit board to new display: adım 0, 1 resimden 1.
Transfer printed circuit board to new display
  • Carefully remove the thin adhesive strip that surrounds the old display and transfer it to the new one.

  • Unplug the wide yellow flex cable from the printed circuit board.

  • Gently peel the circuit board from the old display. Avoid touching the sticky surface.

  • Plug the wide yellow flex cable into the new display. Do not stick the circuit board down yet.

  • Tilt the flex cable and circuit board away from the display, then reattach the two small flex cables that come from the plastic frame.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.