Eşyalarını Tamir Et Topluluk Mağaza

Remplacement de la molette et sélecteur de mode du Samsung NX300

Kılavuza Dön
İngilizce
Fransızca
Adım 3
Samsung NX300 Jog and Mode Dial Replacement, Remove the Power Switch Board: adım 0, 3 resimden 1. Samsung NX300 Jog and Mode Dial Replacement, Remove the Power Switch Board: adım 0, 3 resimden 2. Samsung NX300 Jog and Mode Dial Replacement, Remove the Power Switch Board: adım 0, 3 resimden 3.
Remove the Power Switch Board

  • Using a Phillips #00 precision screwdriver, remove the three 4mm screws holding the power switch board in place.

  • Using tweezers, gently pull the ribbon cable out of the power switch board.

Retirez la carte de l'interrupteur d'alimentation

À l'aide d'un tournevis de précision Phillips # 00, retirez les trois vis de 4 mm qui maintiennent la carte de l'interrupteur d'alimentation en place.

À l'aide d'une pince à épiler, tirez doucement le câble ruban hors de la carte de l'interrupteur d'alimentation.

[title] Remove the Power Switch Board
[* red] Using a Phillips #00 precision screwdriver, remove the three 4mm screws holding the power switch board in place.
-[* orange] Using tweezers, gently pull the ribbon cable out of the power switch board.
+[* orange] Using [product|IF145-020|tweezers], gently pull the ribbon cable out of the power switch board.

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.