Ana içeriğe geç
İngilizce
İspanyolca

Adım 5 çevriliyor

Adım 5
Use a spudger to carefully disconnect the antenna cables from the card by prying them straight up off the board. It's best to use an ESD-safe tool, such as a nylon spudger, rather than the metal spudger shown in the photo.
  • Use a spudger to carefully disconnect the antenna cables from the card by prying them straight up off the board.

  • It's best to use an ESD-safe tool, such as a nylon spudger, rather than the metal spudger shown in the photo.

  • Note the order of colors for the antenna cables indicated on the card.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.