Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Kılavuza Dön
İngilizce
Almanca
Adım 3
Use a Torx T-6 star-bit screwdriver to unscrew the four 7.38 mm screws from the battery housing. Unscrew the four 7.15mm screws from the back casing. Use the blue plastic opener tool along the seam of the case to pry off the front casing.
Back Case

  • Use a Torx T-6 star-bit screwdriver to unscrew the four 7.38 mm screws from the battery housing.

  • Unscrew the four 7.15mm screws from the back casing.

  • Use the blue plastic opener tool along the seam of the case to pry off the front casing.

  • Pry from the bottom of the calculator as the case hooks into the top.

Bir başlık ekle

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.