Ana içeriğe geç
İngilizce
Çince
Adım 3
Use a Torx T-6 star-bit screwdriver to unscrew the four 7.38 mm screws from the battery housing. Unscrew the four 7.15mm screws from the back casing. Use the blue plastic opener tool along the seam of the case to pry off the front casing.
Back Case
  • Use a Torx T-6 star-bit screwdriver to unscrew the four 7.38 mm screws from the battery housing.

  • Unscrew the four 7.15mm screws from the back casing.

  • Use the blue plastic opener tool along the seam of the case to pry off the front casing.

  • Pry from the bottom of the calculator as the case hooks into the top.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.