Uyarı: Ön koşul olan bir kılavuzu düzenliyorsunuz. Yapacağınız bütün değişiklikler bu adımın yer aldığı diğer kılavuzları da etkileyecektir.
Adım 2 çevriliyor
Adım 2
-
The screws to remove the motherboard are located on the top hand side towards the charging port.
-
To reveal the screws, peel of the thin yellow film that covers the whole motherboard just until the screws are accessible.
-
Remove the three 1.2mm Phillips #1 screws using the screwdriver in your 26 Bit Driver Kit.
Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.