Eşyalarını Tamir Et Topluluk Mağaza

Repairing a Hole in a Fiber Glass Jet Ski Body

Kılavuza Dön
İngilizce
Fransızca
Adım 5
Repairing a Hole in a Fiber Glass Jet Ski Body: adım 0, 2 resimden 1. Repairing a Hole in a Fiber Glass Jet Ski Body: adım 0, 2 resimden 2.

  • It's time to mix the resin and hardener together. Read the specific instructions on the back of the container to get the accurate ratio of resin to hardener.

  • Rubber gloves are needed at this point. The resin can be very sticky.

  • Use a mixing stick to swirl the resin once you have added the hardener. The resin is now active and ready to be applied.

Çeviri buraya girin

Çeviri buraya girin

Çeviri buraya girin

Katkılarınız, açık kaynak Creative Commons lisansı altında lisanslanmaktadır.